Elpress B07FLS2H Un-Insulated Tab with two males
Elpress B07FLS2H Un-Insulated Tab with two males is made from high grade 99.95% copper and is tin plated for good corrosion protection. Part Number: B07FLS2H
Elpress Through Connectors, Ring, Pipe, Fork and Pin terminals are produced from high quality Copper 99.95%. The Receptacles and Sockets are made of brass. All terminals are then electro-tin plated for maximum corrosion protection. Terminals made of copper bands have a brazed neck which is soldered, which means that it can be crimped in any direction. Features include:
MARKING OF UNINSULATED TERMINALS
Elpress Uninsulated Terminals are, when possible, marked with logotype, max cross section area and any screw diameter to facilitate identification, inspection and crimp system work.
The International Electrical Commission (IEC) publishes internationally viable standards which, although not directly binding, often have great impact and are used as the basis for international deliveries. A technical report, IEC 61238-2, sets out the following recommendations regarding screw sizes for connecting terminals with Cu and Al plate provided that mounting takes place with a washer and with the correct tightening torque.
Conductor Area: 10 mm2 -> Screw: M6
Conductor Area: 16-50 mm2 -> Screw: M8
Conductor Area: 70-95 mm2 -> Screw: M10
Conductor Area: 120-300 mm2 -> Screw: M12
Conductor Area: 400-500 mm2 -> Screw: M16
UL is an American standard that is also internationally accepted. Elpress standard Cu-Terminals type KR/ KS, KRF/ KSF are UL approved according to no. E205350.
For more information on Elpress B07FLS2H Un-Insulated Tab with two males, see Technical Data below.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
- Material: brass/ Cu, tin plated Cu/Sn.
|B07FLS2H||9||7.5||18.5||6,3 x 0,8||100|
Find out more about our products or becoming a supplier