Elpress Crimp Dies for T2600, V600, V611 and PVX611 (C-Sleeves, Cu & Al Lugs)
Product overview
Elpress Crimp Dies for T2600, V600, V611 and PVX611
Elpress Crimp Dies for T2600, V600 , V611, PVX611 (C-sleeves, Cu & Al Terminals) and discontinued tool PVL611.
Note that KRF Terminals may be used on flexible (IEC60228, class 5) as well as stranded (class 2) conductors and that KRD and KRT Terminals are used on stranded conductors.
Make sure to use dies exactly matching the terminals. crimp dies for Cu
Crimp Dies for KRF/ KSF
For Cu Terminals, hexagonal crimping. Supplied in pairs.
The TB Dies below are intended for Cu Terminals, type KRF/ KSF, together with Cu conductor according to IEC 60228 (Class 2, 5 and 6).
KR/ KS, KRF/ KSF mm2 | Name | Number of Crimps | Net Weight (kg) |
10 / 70 | TB8-17 | 1, 2 | 0,138 |
16 / 35 | TB9-13 | 1 | 0,149 |
25 / 50 | TB11-14,5 | 1 | 0,149 |
10 / 95 | TB7-20 | 1, 2 | 0,135 |
120 | KB22 | 3 | 0,150 |
150 | KB25 | 3 | 0,147 |
Crimp Dies for KRD/ KSD
For Cu Terminals, hexagonal crimping. Supplied in pairs.
The TB Dies below are intended for Cu Terminals, type KRD/ KSD, together with Cu conductor according to IEC 60228 (Class 2).
KRD/ KSD mm2 | Name | Number of Crimps | Net Weight (kg) |
16 / 70 | TB8-14 | 1 | 0,149 |
25 / 50 | TB9-12 | 1 | 0,150 |
35 / 95 | TB11-16 | 1, 2 | 0,142 |
150 | KB22 | 3 | 0,150 |
185 | KB25 | 3 | 0,147 |
Crimp Dies for KRT/ KST
For Cu Terminals, hexagonal crimping. Supplied in pairs.
The TB Dies below are intended for Cu Terminals, type KRT/ KST, together with Cu conductor according to IEC 60228 (Class 2).
KRT/ KST mm2 | Name | Number of Crimps | Net Weight (kg) |
10 / 120 | TB7-19 | 1, 2 | 0,137 |
16 / 95 | TB8,5-18 | 1, 2 | 0,137 |
25 / 70 | TB10-16 | 1, 2 | 0,143 |
35 / 50 | TB12-14 | 1 | 0,147 |
150 | KB22 | 3 | 0,150 |
185 | KB24 | 3 | 0,144 |
240 | KB26 | 3 | 0,145 |
Crimp Dies for Overhead Line
For joints on overhead lines AlMgSi (Super B) and Al59, hexagonal crimping. Supplied in pairs.
Overhead Line mm2 | Name | Number of Crimps | Net Weight (kg) | Note |
31 – 99 | TBNP16-20 | 2 x 5, 2 x 10 | 0,135 | Used for AlMgSi (Super B) and FeAl, LFS31, LFS62 and LFS99. |
Crimp Dies for C-sleeves
For Cu branching wiht C-sleeves, oval crimping. Supplied in pairs.
No Die Holder required. crimp dies for Cu
Through Conductor & Branching mm2 | mm2 | Name | No of Crimps | Net Weight (kg) | Note |
6-16 (C5) & 5-25 (C6) |
Total: 12-16 (C5) & 30-50 (C6) | TBC5-C6 | 1 | 0,142 | C5 (Sleeve: C6-10) and C6 (Sleeve: C16-25) |
6-50 | Total: 50-100 (C89) | TBC89-B13 | 1, 2 | 0,123 | C89 (Sleeve: C25-50) and B13 (KRF/KSF: 35mm2) |
General Information
SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.
HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.
CU TERMINALS
The V1300 System is used for crimping Cu Terminals 10-400mm2. An open-head C version is also available for better access in confined spaces.
The V250 System is used for crimping Cu Terminals 10-800mm2.
AL TERMINALS
The V1300 System is used for the indent crimping of Al Terminals and pre-rounding of Al Conductors 16-240mm2. Round crimping is carried out on sector-shaped Al Conductors.
The V250 System is used for indent crimping Al Terminals and pre-rounding Al Conductors 16-630mm2. Round crimping is carried out on sector-shaped Al Conductors.
For more information on Elpress Crimp Dies for T2600, V600, V611 and PVX611 (C-Sleeves, Cu & Al Lugs), consult PDF File or Technical Data Table below. crimp dies for Cu, Crimp Dies for V611
*Technical Data subject to change without notice.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
Interested in this Product?
+44 (0)1744 762 929Technical Data
Crimp Dies for KRF/ KSF |
|||
For Cu Terminals, hexagonal crimping. Supplied in pairs. The TB Dies below are intended for Cu Terminals, type KRF/ KSF, together with Cu conductor according to IEC 60228 (Class 2, 5 and 6). |
KR/ KS, KRF/ KSF mm2 | Name | Number of Crimps | Net Weight (kg) |
10 / 70 | TB8-17 | 1, 2 | 0,138 |
16 / 35 | TB9-13 | 1 | 0,149 |
25 / 50 | TB11-14,5 | 1 | 0,149 |
10 / 95 | TB7-20 | 1, 2 | 0,135 |
120 | KB22 | 3 | 0,150 |
150 | KB25 | 3 | 0,147 |
Crimp Dies for KRD/ KSD |
|||
For Cu Terminals, hexagonal crimping. Supplied in pairs. The TB Dies below are intended for Cu Terminals, type KRD/ KSD, together with Cu conductor according to IEC 60228 (Class 2). |
KRD/ KSD mm2 | Name | Number of Crimps | Net Weight (kg) |
16 / 70 | TB8-14 | 1 | 0,149 |
25 / 50 | TB9-12 | 1 | 0,150 |
35 / 95 | TB11-16 | 1, 2 | 0,142 |
150 | KB22 | 3 | 0,150 |
185 | KB25 | 3 | 0,147 |
Crimp Dies for KRT/ KST |
|||
For Cu Terminals, hexagonal crimping. Supplied in pairs. The TB Dies below are intended for Cu Terminals, type KRT/ KST, together with Cu conductor according to IEC 60228 (Class 2). |
KRT/ KST mm2 | Name | Number of Crimps | Net Weight (kg) |
10 / 120 | TB7-19 | 1, 2 | 0,137 |
16 / 95 | TB8,5-18 | 1, 2 | 0,137 |
25 / 70 | TB10-16 | 1, 2 | 0,143 |
35 / 50 | TB12-14 | 1 | 0,147 |
150 | KB22 | 3 | 0,150 |
185 | KB24 | 3 | 0,144 |
240 | KB26 | 3 | 0,145 |
Crimp Dies for Overhead Line |
|||
For joints on overhead lines AlMgSi (Super B) and Al59, hexagonal crimping. Supplied in pairs. |
Overhead Line mm2 | Name | Number of Crimps | Net Weight (kg) | Note |
31 - 99 | TBNP16-20 | 2 x 5, 2 x 10 | 0,135 | Used for AlMgSi (Super B) and FeAl, LFS31, LFS62 and LFS99. |
Crimp Dies for C-sleeves |
|||
For Cu branching wiht C-sleeves, oval crimping. Supplied in pairs. No Die Holder required. |
Through Conductor & Branching mm2 | mm2 | Name | No of Crimps | Net Weight (kg) | Note |
6-16 (C5) & 5-25 (C6) | Total: 12-16 (C5) & 30-50 (C6) | TBC5-C6 | 1 | 0,142 | C5 (Sleeve: C6-10) and C6 (Sleeve: C16-25) |
6-50 | Total: 50-100 (C89) | TBC89-B13 | 1, 2 | 0,123 | C89 (Sleeve: C25-50) and B13 (KRF/KSF: 35mm2) |
Technical Information
- Image 1: TB Dies.
- Image 2: KB Dies.
- Image 3: One, two or three crimps demonstration.
- Image 4: TBNP Dies.
- Image 5: TBC Dies.
- Image 6: One resp. two crimps.



