Elpress Crimp Dies for V1300, V1311, PVL1300 and PVX1300 (OHL Connectors) Crimp Dies for V1300

Product overview

Elpress Crimp Dies – OHL Connectors

Elpress Crimp Dies for V1300V1311-A and PVX1300 (OHL Connectors) – Crimp Dies for AlMgSi (Super B), Al59 & FeAl. Supplied as a pair. Elpress B16NP, 13B26, B6FE


Crimp Dies for AlMgSi (Super B) & Al59

Supplied in pairs. Hexagonal Crimping. Use inner die holder V1316 and outer die holder V1318.

Overhead
Line
Name No of
Crimps
Net
Weight (kg)
Die
Holder
Note
31-62 mm2 B16NP 2 x 5 0,118 Required AlMgSi 31-62mm2, FeAl 62mm2, ALUS 50mm2
99 mm2 B20NP 2 x 5 0,126 Required AlMgSi 99mm2, FeAl 99mm2
157 mm2 13B26 2 x 16 0,420 Not Required OHL 157mm2 (2 x 16 crimps)
241 mm2 13B32 2 x 16 0,408 Not Required OHL 241mm2 (2 x 16 crimps)

Crimp Dies for Overhead Lines FeAl

Supplied in pairs. BxxFE Dies are used for steel sleeves and BxxNP Dies are used for Al sleeves. Use inner die holder V1316 and outer die holder V1318.

mm2 Die Fe Die Al No of Crimps
62 B6FE B16NP 2 x 5
99 B8FE B20NP 2 x 5

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.

For more information on Elpress Crimp Dies for V1300, V1311-A and PVX1300 (OHL Connectors), consult PDF File or Technical Data Table below. Elpress B16NP, 13B26, B6FE

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Crimp Dies for AlMgSi (Super B) & Al59

Supplied in pairs. Hexagonal Crimping. Use inner die holder V1316 and outer die holder V1318.

Overhead
Line
Name No of
Crimps
Net
Weight (kg)
Die
Holder
Note
31-62 mm2 B16NP 2 x 5 0,118 Required AlMgSi 31-62mm2, FeAl 62mm2, ALUS 50mm2
99 mm2 B20NP 2 x 5 0,126 Required AlMgSi 99mm2, FeAl 99mm2
157 mm2 13B26 2 x 16 0,420 Not Required OHL 157mm2 (2 x 16 crimps)
241 mm2 13B32 2 x 16 0,408 Not Required OHL 241mm2 (2 x 16 crimps)

Crimp Dies for Overhead Lines FeAl

Supplied in pairs. BxxFE Dies are used for steel sleeves and BxxNP Dies are used for Al sleeves. Use inner die holder V1316 and outer die holder V1318.

mm2 Die Fe Die Al No of Crimps
62 B6FE B16NP 2 x 5
99 B8FE B20NP 2 x 5

Find out more about our products or becoming a supplier