Elpress Crimp Dies V250 (Cu Lugs)

Product overview

Elpress Crimp Dies for V250

Elpress Crimp Dies for V250 (Cu Lugs & C-Sleeves). If Die Holders are required use Elpress V2506 (inner) and V2508 (outer).

The B dies below are intended for Cu Terminals (type KR/KRF and KS/KSF), together with both stranded Cu Conductors (Class 2) according to IEC 60228. For multi-stranded (Class 5) Cu Conductors, crimping is recommended with the DUAL System.

Make sure to use dies exactly matching the terminals.


Crimp Dies for KRF/ KSF

For Cu Terminals, hexagonal crimping. Supplied in pairs. If Die Holders are required use Inner Die Holder V2506 and Outer Die Holder V2508.

KR/ KS, KRF/ KSF mm2 Name Number of Crimps Net Weight (kg)
10 B8 1 0,101
16 B9 1 0,103
25 B11 1 0,109
35 B13 1 0,113
50 B14,5 1 0,111
70 B17 1 0,107
95 B20 1 0,115
120 B22 1 0,148
150 B25 1 0,135
185 B27 1 0,128
240 B30 1 0,115
300 B2532* 1 1,018
400 B2538* 2 0,896
500 B2542* 2 0,874
600 B2553* 3 0,912

*Note: B2532, B2538, B2542, B2553 do not require a Die Holder.


Crimp Dies for KRD/ KSD

For Cu Terminals, hexagonal crimping. Supplied in pairs. If Die Holders are required use Elpress Inner Die Holder V2506 and Outer Die Holder V2508.

KRD/ KSD mm2 Name Number of Crimps Net Weight (kg)
16 B8 1 0,101
25 B9 1 0,103
35 B11 1 0,109
50 B12 1 0,108
70 B14 1 0,112
95 B16 1 0,107
120 B19 1 0,118
150 B22 1 0,148
185 B25 1 0,135
240 B27 1 0,128
300 B30 1 0,115
400 B2532* 1 1,018
500 B2540* 2 0,891
630 B2545* 3 0,899
800 B2553* 3 0,912

*Note: B2532, B2540, B2545, B2553 do not require a Die Holder.


Crimp Dies for KRT/ KST

For Cu Terminals, hexagonal crimping. Supplied in pairs. If Die Holders are required use Elpress Inner Die Holder V2506 and Outer Die Holder V2508.

KRT/ KST mm2 Name Number of Crimps Net Weight (kg)
10 B7 1 0,101
16 B8,5 1 0,101
25 B10 1 0,106
35 B12 1 0,108
50 B14 1 0,112
70 B16 1 0,107
95 B18 1 0,120
120 B19 1 0,118
150 B22 1 0,148
185 B24 1 0,139
240 B26 1 0,131
300 B30 1 0,115
400 B2532* 1 1,018
500 B2540* 2 0,891
630 B2545* 3 0,899
800 B2553* 3 0,912

*Note: B2532, B2540, B2545, B2553 do not require a Die Holder.


Crimp Dies for C-sleeves

For Cu branching with C-sleeves, oval crimping. If Die Holders are required use Elpress Inner Die Holder V2506 and Outer Die Holder V2508.

Through Conductor &
Branching mm2
mm2 Name  No of Crimps Net Weight (kg)  Die Holder
6-16 Total: 12-26 BC5 1 0,112 Required
5-25 Total: 30-50 BC6 1 0,149 Required
6-50 Total: 50-100 BC8-9 1 0,138 Required
25-120 Total: 95-190 BC13 1 0,142 Required
25-185 Total: 175-240 B25C15 1 1,012 Not
25-300 Total: 245-425 B25C18 2 0,954 Not
150-300 Total: 450-540 B25C21 2 0,864 Not

Dies Holders for the V250 System

Elpress Inner Die Holder V2506

Elpress Inner Die Holder V2506 – Net Weight: 0,341

Elpress Outer Die Holder V2508

Elpress Outer Die Holder V2508 – Net Weight: 0,632


General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.

For more information on Elpress Crimp Dies for V250 (Cu Lugs & C-Sleeves), consult PDF File or Technical Data Table below.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Crimp Dies for KRF/ KSF

For Cu Terminals, hexagonal crimping. Supplied in pairs. If Die Holders are required use Inner Die Holder V2506 and Outer Die Holder V2508.

KR/ KS, KRF/ KSF mm2 Name Number of Crimps Net Weight (kg)
10 B8 1 0,101
16 B9 1 0,103
25 B11 1 0,109
35 B13 1 0,113
50 B14,5 1 0,111
70 B17 1 0,107
95 B20 1 0,115
120 B22 1 0,148
150 B25 1 0,135
185 B27 1 0,128
240 B30 1 0,115
300 B2532* 1 1,018
400 B2538* 2 0,896
500 B2542* 2 0,874
600 B2553* 3 0,912

*Note: B2532, B2538, B2542, B2553 do not require a Die Holder.


Crimp Dies for KRD/ KSD

For Cu Terminals, hexagonal crimping. Supplied in pairs. If Die Holders are required use Inner Die Holder V2506 and Outer Die Holder V2508.

KRD/ KSD mm2 Name Number of Crimps Net Weight (kg)
16 B8 1 0,101
25 B9 1 0,103
35 B11 1 0,109
50 B12 1 0,108
70 B14 1 0,112
95 B16 1 0,107
120 B19 1 0,118
150 B22 1 0,148
185 B25 1 0,135
240 B27 1 0,128
300 B30 1 0,115
400 B2532* 1 1,018
500 B2540* 2 0,891
630 B2545* 3 0,899
800 B2553* 3 0,912

*Note: B2532, B2540, B2545, B2553 do not require a Die Holder.

 


Crimp Dies for KRT/ KST

For Cu Terminals, hexagonal crimping. Supplied in pairs. If Die Holders are required use Inner Die Holder V2506 and Outer Die Holder V2508.

KRT/ KST mm2 Name Number of Crimps Net Weight (kg)
10 B7 1 0,101
16 B8,5 1 0,101
25 B10 1 0,106
35 B12 1 0,108
50 B14 1 0,112
70 B16 1 0,107
95 B18 1 0,120
120 B19 1 0,118
150 B22 1 0,148
185 B24 1 0,139
240 B26 1 0,131
300 B30 1 0,115
400 B2532* 1 1,018
500 B2540* 2 0,891
630 B2545* 3 0,899
800 B2553* 3 0,912

*Note: B2532, B2540, B2545, B2553 do not require a Die Holder.


Crimp Dies for C-sleeves

For Cu branching with C-sleeves, oval crimping. If Die Holders are required use Inner Die Holder V2506 and Outer Die Holder V2508.

Through Conductor &
Branching mm2
mm2 Name  No of Crimps Net Weight (kg)  Die Holder
6-16 Total: 12-26 BC5 1 0,112 Required
5-25 Total: 30-50 BC6 1 0,149 Required
6-50 Total: 50-100 BC8-9 1 0,138 Required
25-120 Total: 95-190 BC13 1 0,142 Required
25-185 Total: 175-240 B25C15 1 1,012 Not
25-300 Total: 245-425 B25C18 2 0,954 Not
150-300 Total: 450-540 B25C21 2 0,864 Not

Dies Holders for the V250 System

Elpress Inner Die Holder V2506

Inner Die Holder V2506 - Net Weight: 0,341

Elpress Outer Die Holder V2508

Outer Die Holder V2508 - Net Weight: 0,632

Technical Information

  • Image 1: Die Holder V2508 + B-type Dies + Die Holder V2506.
  • Image 2: Die pair B2542.
  • Image 3: Crimp sequence.
  • Image 4: Die Holder V2508 + BC-type Dies + Die Holder V2506.
Elpress-Die-Holder-V2508-B-Dies-Die-Holder-V2506-For-V250 Elpress-TBC-Crimp-Dies-C-Sleeves-Branch-Connectors

Find out more about our products or becoming a supplier