Elpress KRF Angled Copper Cable Lugs - 45° Degrees (10-150mm²) - KRF50-12-45GR
Elpress KRF Angled Copper Cable Lugs - 45° Degrees (10-150mm²) - KRF50-12-45GR

Product overview

Elpress KRF Angled Copper Cable Lugs 45°

Elpress KRF Angled Copper Cable Lugs 45° (10-150mm²) are produced from electrolytic copper (Cu 99.95%) and are tin plated (Cu/Sn).
Part Numbers: KR10-6-45GR, KR10-8-45GR, KR10-10-45GR, KRF16-6-45GR, KRF16-8-45GR, KRF16-10-45GR, KRF25-6-45GR, KRF25-8-45GR, KRF25-10-45GR, KRF35-6-45GR, KRF35-8-45GR, KRF35-10-45GR, KRF50-8-45GR, KRF50-10-45GR, KRF50-12-45GR, KRF70-8-45GR, KRF70-10-45GR, KRF70-12-45GR, KRF95-10-45GR, KRF95-12-45GR, KRF95-16-45GR, KRF120-10-45GR, KRF120-12-45GR, KRF120-16-45GR, KRF150-10-45GR, KRF150-12-45GR, KRF150-16-45GR, KRF185-12-45GR, KRF185-12-45GR, KRF240A-10-45GR, KRF240A-12-45GR, KRF240A-16-45GR, KRF300A-16-45GR.

*Please note, Part Numbers highlighted in bold are Network Rail-approved according to PADS Certificate PA05/07403. This refers to sizes 16-185mm².

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and the achievement of a secure connection through the proper handling of our products. By using Elpress Cu-Connection elements together with one of Elpress Crimp Systems one obtains a connection that has been tested according to the requirements of IEC 61238:1.

COPPER (CU) TERMINALS
Elpress Copper Connectors made of pure Copper 99.95%. We manufacture Tube Terminals type KR/ KRF/ KRD/ KRT, Through Connectors type KS/ KSF/ KSD/ KST for stranded conductors, IEC 60228 Class 2, and flexible conductors IEC 60228 Class 5 such as C-Sleeves primarily pre-splicing of Cu-lines and many customised products. For flexible and stranded Cu conductors, use terminals of type KR/ KRF and through connectors of type KS/ KSF. Use terminals of type KRD/ KRT and through connectors type KSD/ KST on stranded Cu conductors from and including 500mm2. Mainly use terminals of type KR/ KRF/ KRD/ KRT in the splicing of copper conductors in cable assemblies. Can also use them for straight splicing of earth conductors. With a branching sleeve, type C, one splices and branches earth conductors, lightning conductor installations and the like.

Approvals & Marking

UL-APPROVED TERMINALS
UL is an American, but also internationally accepted, standard. Elpress standard Cu Terminals of types KR/ KS, KRF/ KSF, KRT/ KST, KRFS, KRFN (e.g. KRFN120-10, KRFN120-12) are UL-approved according to file no E205350.

DNV APPROVED
Elpress KR/ KS, KRF/ KSF and KRT/ KST Terminals meet DNV’s rules for classification of ships and Det Norske Veritas’ Offshore Standrards. The Terminals have an approval for installations on ships and mobile offshore units.

NUMBER OF CRIMPS
Normally one crimp is necessary up to and including 150mm2 and 2 or 3 crimps for larger areas. Note, however, that another number of crimps may be essential in some cases, see table for tool dies. If possible, you should place crimps next to each other with a couple of mm spacing between each one. Overlap is sometimes inevitable.

MARKING OF CU TERMINALS
Elpress marking system for Copper Terminals shows logotype, cable area and type number for hexagonal die. This system allows you to check the use of correct tools when contact crimping, because the die number automatically becomes embossed during the contact crimping.

For more information on Elpress KRF Angled Copper Cable Lugs 45° (KRF25-8-45GR, KRF50-10-45GR, KRF50-12-45GR), consult PDF File or Technical Data Table  below. KRF50-12-45GR

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Material: Cu 99.95%, tin plated Cu/Sn.
  • Cable inspection hole
  • For Stranded (class 2) and Flexible (class 5) Cu-conductors.
  • For Flexible Cu Conductors, Elpress recommends the DUAL System.
  • UL-approved (KRF 35-150mm²). DNV-approved (16-150mm²).


Marking example KRF: 70 10F (Elpress logotype included)

Cat. No. Area mm² AWG Cu A d D N N1 W s t Screw Angle Die no. Pcs/ Pack Rec. Tools
KR10-6-45GR 10 8 19 5 8 6,5 11,5 13 11 2,3 M6 45 8 100 PVL350, V600, DV1300, DV250
KR10-8-45GR 10 8 19 5 8 8,5 12 13,5 11 2,2 M8 45 8 100 PVL350, V600, DV1300, DV250
KR10-10-45GR 10 8 19 5 8 11,5 13,5 16 11 2 M10 45 8 100 PVL350, V600, DV1300, DV250
KRF16-6-45GR 16 6 23 6 9 6,5 11,5 13 12 2,9 M6 45 9 100 PVL350, V600, DV1300, DV250
KRF16-8-45GR 16 6 23 6 9 8,5 12 13 12 2,7 M8 45 9 100 PVL350, V600, DV1300, DV250
KRF16-10-45GR 16 6 23 6 9 11,5 13,5 16 12 2,3 M10 45 9 100 PVL350, V600, DV1300, DV250
KRF25-6-45GR 25 4 24 8 11 6,5 11,5 16 13 2,7 M6 45 11 100 PVL350, V600, DV1300, DV250
KRF25-8-45GR 25 4 24 8 11 8,5 12 16 13 2,7 M8 45 11 100 PVL350, V600, DV1300, DV250
KRF25-10-45GR 25 4 23 8 11 11,5 13,5 17 13 2,9 M10 45 11 100 PVL350, V600, DV1300, DV250
KRF35-6-45GR 35 2 30 9 13 6,5 11,5 18 16 3,9 M6 45 13 100 PVL350, V600, DV1300, DV250
KRF35-8-45GR 35 2 30 9 13 8,5 12 18 16 3,9 M8 45 13 100 PVL350, V600, DV1300, DV250
KRF35-10-45GR 35 2 30 9 13 11,5 13,5 18 16 3,9 M10 45 13 100 PVL350, V600, DV1300, DV250
KRF50-8-45GR 50 1/0 31 11 14,5 8,5 17,5 21 19 3,4 M8 45 14,5 100 PVL350, V600, DV1300, DV250
KRF50-10-45GR 50 1/0 31 11 14,5 11,5 18,5 21 19 3,4 M10 45 14,5 100 PVL350, V600, DV1300, DV250
KRF50-12-45GR 50 1/0 31 11 14,5 12,5 19,5 21 19 3,3 M12 45 14,5 100 PVL350, V600, DV1300, DV250
KRF70-8-45GR 70 2/0 35 13 17 8,5 17,5 24 22 3,9 M8 45 17 50 PVL350, V600, DV1300, DV250
KRF70-10-45GR 70 2/0 35 13 17 11,5 18,5 24 22 3,9 M10 45 17 50 PVL350, V600, DV1300, DV250
KRF70-12-45GR 70 2/0 35 13 17 12,5 19,5 24 22 3,9 M12 45 17 50 PVL350, V600, DV1300, DV250
KRF95-10-45GR 95 4/0 40 15 20 11,5 18,5 28 25 4,9 M10 45 20 50 V600, DV1300, DV250
KRF95-12-45GR 95 4/0 40 15 20 12,5 19,5 28 25 4,9 M12 45 20 50 V600, DV1300, DV250
KRF95-16-45GR 95 4/0 40 15 20 15,5 20,5 29 25 4,8 M16 45 20 50 V600, DV1300, DV250
KRF120-10-45GR 120 250 43 17 22 11,5 18,5 32 27 4,9 M10 45 22 25 V600, DV1300, DV250
KRF120-12-45GR 120 250 43 17 22 12,5 19,5 32 27 4,9 M12 45 22 25 V600, DV1300, DV250
KRF120-16-45GR 120 250 43 17 22 15,5 20,4 32 27 4,9 M16 45 22 25 V600, DV1300, DV250
KRF150-10-45GR 150 300 49 19 25 11,5 18,5 36 32 5,8 M10 45 25 25 V600, DV1300, DV250
KRF150-12-45GR 150 300 49 19 25 12,5 19,5 36 32 5,8 M12 45 25 25 V600, DV1300, DV250
KRF150-16-45GR 150 300 49 19 25 15,5 20,5 36 32 5,8 M16 45 25 25 V600, DV1300, DV250
KRF185-12-45GR 185 55 21 27 11,5 18,5 39 37 5,8 M10 45 27 25 V600, DV1300, DV250
KRF185-12-45GR 185 55 21 27 12,5 19,5 39 37 5,8 M12 45 27 V600, DV1300, DV250
KRF240A-10-45GR 240 57 22,5 29 11,5 18,5 42 37 6,3 M10 45 30 V600, DV1300, DV250
KRF240A-12-45GR 240 57 22,5 29 12,5 19,5 42 37 6,3 M12 45 30 V600, DV1300, DV250
KRF240A-16-45GR 240 57 22,5 29 15 21 42 37 6,4 M16 45 30 V600, DV1300, DV250
KRF300A-16-45GR 300 24,5 31,5 20 25 46 40 6,8 M16 45 32 V600, DV1300, DV250

70=mm² 10= palm hole for M10 F=type KRF, for stranded and flexible conductors

 

Find out more about our products or becoming a supplier