+44 (0)1744 762 929
Elpress Pre-Insulated Receptacles - Halogen Free (0.1-6mm²)

Product overview

Elpress Pre-Insulated Receptacles – Halogen Free (0.1-6mm²) are manufactured of brass or tin bronze, are tin plated and have brazed necks. Part Numbers:

 

Elpress Pre-Insulated Receptacles Features

Elpress ring, fork and pin terminals are manufactured from high grade copper and the receptacles from brass or tin-bronze. All terminals are electrolytically tin plated to achieve good corrosion protection. The necks of the terminals are brazed and annealed to allow crimping in any direction around the neck. The metal in the receptacles neck is double folded for excellent mechanical strength and electrical conductivity.

CORROSION PROTECTION
All terminals are electrolytically tinned for maximum corrosion protection. The necks of the terminals are brazed and annealed to allow crimping in any direction around the neck. The metal in the receptacles neck is double folded for excellent mechanical strength and electrical conductivity.

INSULATION
Insulating sleeves are usually made of PC, which has excellent deformation characteristics and retains its shape after compression, thus retaining its vibration support. As in difference from example PVC, PC is halogen free. The sleeve colours define the cross-sectional area.

EASY-ENTRY
It is easy to guide the conductor correctly into the terminal, since the insulation sleeve is of the “easy-entry” type.

LABELLING
The Elpress terminals are marked with a logo, the cross-sectional area and where applicable the screw diameter. When crimping is completed with the correct tool, the Elpress dies or tools stamp the insulating sleeve so that all connections can be checked afterwards. Except for the hobby tools, there is a built-in full closure system which ensures that the complete crimping procedure has been performed – a condition for ensuring a professional and high quality job.

For more information on Elpress Pre-Insulated Receptacles – Halogen Free (0.1-6mm²), consult the PDF File or Technical Data table below.

 

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Data: brass or tin bronze, tin plated, brazed necks.
  • PC sleeves have EasyEntry, PC and PA sleeves are halogen free.
Insulation Colour mm² Cat. No. mm d L For Tabs s Rec. Tool Pcs/Pack Insulation Type
0,1-0,5 A0503FLS5 2,3 16 2.8x0.5 7 DSA0115 100 PVC*
0,1-0,5 A0503FLS8 2,3 16 2.8x0.8 7 DSA0115 100 PVC*
0,5-1,5 A1503FLS5 3,3 18,5 2.8x0.5 7 GSA0760 100 PC
0,5-1,5 A1503FLS8 3,3 18,5 2.8x0.8 7 GSA0760 100 PC
0,5-1,5 A1505FLS5 3,7 19 4.8x0.5 7 GSA0760 100 PVC
0,5-1,5 A1505FLS8 3,7 19 4.8x0.8 7 GSA0760 100 PVC
0,5-1,5 A1507FLS 4 20 6.3x0.8 7 GSA0760 100 PC
0,5-1,5 A1507FLST 4 20 6.3x0.8 7 GSA0760 100 PC**
1,5-2,5 A2505FLS5 4,4 19 4.8x0.5 8 GSA0760 100 PVC
1,5-2,5 A2505FLS8 4,4 19 4.8x0.8 8 GSA0760 100 PVC
1,5-2,5 A2507FLS 4,5 20 6.3x0.8 8 GSA0760 100 PC
1,5-2,5 A2507FLST 4,5 20 6.3x0.8 8 GSA0760 100 PC**
1,5-2,5 A2508FLS 4,3 24 8.4x0.8 8 GSA0760 100 PVC***
4,0-6,0 A4607FLS 6,4 24 6.3x0.8 9 GSA0760 100 PC
4,0-6,0 A4609FLS 6,2 31 9.5x1.2 9 GSA0760 100 PVC***

s= strip length, *no Easy Entry, **made from tin-bronze (phosphorus bronze), *** not brazed, reinforcement sleeve, no EasyEntry

    Make an enquiry