+44 (0)1744 762 929
Elpress Un-Insulated Connector Blocks (for Receptacles)

Product overview

Elpress Un-Insulated Connector Blocks used together with Receptacles ranging between 0.5 and 6mm².

  • Used together with receptacles
  • Material PVC semi-transparent
  • Max voltage 400 V
  • Max current 18 A


General Information

Elpress Un-Insulated Ring, Tube Terminals, Forks, Pins and Connectors are produced from high grade 99.95 copper. The Receptacles, Tabs, Bullets and Sockets are produced from brass. All types are electrolytically tin plated for good corrosion protection. Rings, Forks and Pins have brazed necks to allow crimping in all radial directions. Features include:

Elpress Un-Insulated Terminals are, when possible, marked with logotype, max cross section area and possible screw size to facilitate identification, inspection and crimp system work.

UL is an American standard which is also internationally accepted. Elpress standard Cu Terminals of types KR/ KS, KRF/ KSF. KRT/ KST are UL approved according to no. E205350. Cu Terminals of types KR/ KS, KRF/ KSF are for stranded and flexible copper wires, classes 2 and 5 according to IEC 60228, and have a working area of 1-500mm².

For more information on Elpress Un-Insulated Connector Blocks (for Receptacles), see PDF File below.


FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

 All figures mentioned below can be found at the end of the page.

Figure Cat. No. No of Terminals  mm L W H Tabs Pcs/ Pack
1 404-1 1 48 12 6 6,3 x 0,8 100
20 405-3 1+2 54,5 20,7 7,4 6,3 x 0,8 100
3 401-12 12 147 28 7 6,3 x 0,8 100

    Make an enquiry

    Elpress-PVC-Connector-Blocks-Fig1 Elpress-PVC-Connector-Blocks-Fig2 Elpress-PVC-Connector-Blocks-Fig3