Nexans 17-24JTS1 W (CS) MV Heat-Shrink Joints

Product overview

Nexans 17-24JTS1 W (CS) MV Heat-Shrink Joints

Nexans 17-24JTS1 W (CS) MV Heat-Shrink Joints are medium voltage heat-shrinkable straight joints with triple layer tube for Unarmoured Single Core Polymeric Cables with Copper Wire or Copper Tape Screen. Up to Umax 24kV. Nexans 17JTS1 W

Part Numbers: 17JTS1.95W-(CS), 17JTS1.240W-(CS), 17JTS1.300W-(CS), 17JTS1.400W-(CS), 24JTS1.95W-(CS), 24JTS1.240W-(CS), 24JTS1.300W-(CS), 24JTS1.400W-(CS)

Nexans 17-24JTS1 W (CS) Applications

17-24JTS1 W heat-shrinkable straight joints are designed for unarmoured, plastic insulated cables with Cu wire or Cu tape screen, to accommodate either crimped or mechanical connectors.

Key Benefits

• Quick and Easy to install – saving labour time, with no additional retraining required.
• Short and Slim design – with impressive range taking sizes.
• Excellent Insulating Properties – for safer installations.
• Advanced Screen Connection & Armour Continuity – for maximum control of fault currents.
• Thick Walled Tubing for High Mechanical Strength and Impact Resistance.
• Proof against Water Penetration & Chemical Aggression.
• Stabilized UV Protection – for longevity outdoors.
• Halogen Free Material Content – for safer use in enclosed spaces.
• Made to measure Fire Resistant blankets if required.
• LSOH outersheath as standard.
• To fit single core and three core MV cables up to 36kV.
• Easy access to Technical Support from our UK based technical staff.

Installation Video

Technical Characteristics & Design

For 12 to 24kV applications the 17-24JTS heat shrinkable joint is the new high performance, compact and easy to install joint. A single body with all the electrical functions integrated!

The JTS 17/24 is using Nexans’ “TRIPLE GT125”, an integrated stress control field, insulating and conductive tube, which can withstand high voltage applications up to 24kV.

A double layer pad with conductive rubber inside and HK orange mastic outside ensure a Faraday cage and smooth the effect of the electrical field and of the voltage gradient in the connector area.

The electrical continuity of the screen is ensured by a tinned copper stocking with roll constant force springs in case of copper wire/tape screen (CS type) or with a standard tinned copper tape plus an earthing ferrule in case of only copper wire screen (W type).

The outer sheath is restored with heavy wall adhesive lined tubing. MC types supplied with “Nexans GPH” mechanical connectors.

– 17JTS type tested with BIL at 95 kV, PD at 2Uo (≤ 10 pC)
– 24JTS type tested with BIL at 150 kV, PD at 2Uo (≤ 10 pC)

Additional Technical Data of Nexans 17-24JTS1 W (CS) MV Heat-Shrink Joints can be found on the table below. For more information, please advise PDF Files. Nexans 17JTS1 W

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929