Nexans Euromold 180AR-1 Equipment Bushing
Nexans Euromold 180AR-1 & K180AR-1 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
- Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
- The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180.
Specification & Design
To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K180AR-1/J). The bushings are equipped with 6 tabs for the bail restraint. The (K)180AR-1-G with 4 tabs and 2 threaded inserts M6 (-G version).
|180AR-1||12 kV||250 Amps|
|K180AR-1||24 kV||250 Amps|
Nexans Euromold 180AR-X Fixings for Bushings
For Ordering Instructions and Part Number Selection Table of Nexans Euromold Equipment Bushings (180AR-1 , K180AR-1), please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K180AR-1/J).
|EQUIPMENT BUSHING TYPE||VOLTAGE
|180AR-1||12 kV||250 Amps||222 mm||106 mm|
|K180AR-1||24 kV||250 Amps||222 mm||106 mm|
Find out more about our products or becoming a supplier