Nexans Euromold 484TB Separable Tee Connector (484TB/G, K484TB/G, M484TB/G, P484TB/G)
Nexans Euromold 484TB Separable Tee Connector (484TB/G, K484TB/G, M484TB/G, P484TB/G)

Product overview

Nexans Euromold 484TB Separable Tee Connector

Nexans Euromold 484TB Separable Tee Connector is a tee-connector (bolted type) used to terminate MV-HV XLPE/EPR (polymeric) insulated cables up to 42kV into 400 Series Interface C Bushings on medium/high voltage electrical equipment (transformers, switchgear, motors, etc.). Meets the requirements of CENELEC HD 629,1. Also used to connect cable to cable when using the appropriate mating parts.
Type 484TB Part Numbers: 484TB/G, K484TB/G, M484TB/G, P484TB/G.

Euromold 484TB is a bolted separable tee connector specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12kV)
  • 6.35/11 (12kV)
  • 8.7/15 (17.5kV)
  • 12/20 (24kV)
  • 12.7/22 (24kV)
  • 18/30 (36kV)
  • 19/33 (36kV)
  • 20.8/36 (42kV)

Technical Characteristics

  • A thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
  • Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.

Specification & Design

The 484TB separable connector meets the requirements of CENELEC HD 629,1.

Euromold
Type 484TB		 Voltage
Um		 Current
Ir		 Conductor Size
Min-Max
484TB/G 12 kV 1250 Amps 240-630 mm2
K484TB/G 24 kV 1250 Amps 240-630 mm2
M484TB/G 36 kV 1250 Amps 240-630 mm2
P484TB/G 42 kV 1250 Amps 240-630 mm2

 

Nexans Euromold 484TB DesignSeparable connector comprising:

  1. Conductive EPDM insert
  2. Conductive EPDM jacket
  3. Insulating EPDM layer moulded between the insert and the jacket
  4. Type C interface as described by CENELEC EN 50180 and 50181
  5. Conductor contact
  6. Basic insulating plug (with VD point)
  7. Cable reducer
  8. Conductive rubber cap
  9. Stud & flange nut
  10. Earthing lead

The screen break design enables cable outer sheath testing without removing or dismantling the connector.

484TB Tee Connector Kit Contents

The complete (K)(M)(P)484TB/G tee connector kit comprises 3 x the following components. The kit also comprises silicone grease, field control mastic, gloves, wipers, roll adhesive tape, installation instructions and crimp chart.

Nexans Euromold 484TB Kit

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 484TB Separable Tee Connector (484TB/G, K484TB/G, M484TB/G, P484TB/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

ORDERING INSTRUCTIONS FOR (K)(M)(P)484TB

To order the tee connector, select the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to your conductor size and type. Add a 'K' for use up to 24 kV, add an 'M' for use up to 36 kV and a 'P' for use up to 42 kV.

Example: The cable is 36 kV, 240 mm2 stranded aluminium with a diameter over core insulation of 37 mm. Order a 3 x M484TB/G-S-32-240BI2 tee connector kit.
PART NUMBER DIAMETER OVER CORE INSULATION MIN DIAMETER OVER CORE INSULATION MAX
3 x 484TB/G-S-22-X 23.5 mm 31 mm
3 x 484TB/G-S-27-X 28.5 mm 37.5 mm
3 x 484TB/G-S-32-X 34 mm 42.5 mm
3 x 484TB/G-S-37-X 39 mm 48.5 mm
3 x 484TB/G-S-43-X 45.5 mm 56 mm

 

TABLE X - ALUMINIUM & COPPER CONDUCTOR
CONDUCTOR SIZE  Alu Conductor
DIN Hexagonal		 Alu Conductor
Deep Indent		 Alu & Cu Conductor
Bolted		 Cu Conductor
DIN Hexagonal
240 mm2 240BI2 240BI1  185.400UN5 240CU2
300 mm2 300BI2 300BI1  185.400UN5 300CU2
400 mm2 400BI2 400BI1  185.400UN5, 400.630UN5 400CU2
500 mm2 500BI2 500BI1 400.630UN5  500CU2
630 mm2 - 630BI1 400.630UN5  630CU2

Find out more about our products or becoming a supplier