Nexans Euromold 900AR-2 Equipment Bushing
Nexans Euromold 900AR-2 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
- 18/30 (36kV)
- 19/22 (36kV)
- 20.8/36 (42kV)
- Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
- The bolted type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 60137.
Specification & Design
To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. 900AR-1/GS):
|900AR-2||F2||42 kV||630 Amps|
Nexans Euromold 900AR-X Fixings for Bushings
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 900AR-2 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS).
This earth connection must be specified when ordering (e.g. 900AR-2/GS).
|EQUIPMENT BUSHING TYPE||Interface Type
|900AR-2||F2||42 kV||630 Amps||364 mm||175 mm||25 mm|
Find out more about our products or becoming a supplier