Nexans Euromold 400 Series (interface B) Accessories

Product overview

Nexans Euromold Interface B Accessories

Nexans Euromold Interface B (400 Series) Accessories for use with connectors and bushings with an interface B as described by CENELEC EN 50180 and 50181.
Euromold Part Numbers: 400DR, 400SOP, 400GP, 400BIPA, 400CP-SC, 400RTPA, KIT MT.

Voltage classes:

  • 6/10 (12kV)
  • 6.35/11 (12kV)
  • 8.7/15 (17.5kV)
  • 12/20 (24kV)
  • 12.7/22 (24kV)
  • 18/30 (36 kV)
  • 19/33 (36kV)

Technical Characteristics

  • All Euromold Interface B (400 Series) Accessories, except the earthing plug, are tested for AC withstand and partial discharge prior to leaving the factory.

Nexans Euromold Interface B Accessories

Nexans Euromold 400 Series Accessories - 400DR

400DR Dead-end Receptacle

Euromold 400DR Dead-end Receptacle fits over a bushing with a type B interface to provide ‘dead-end’ facility. Is used with a  400BA restraint bail.

Order 400DR for 12 kV, K400DR for 24 kV or M400DR for 36 kV applications. Can be supplied with integral earth lead: add -/G.


Nexans Euromold 400 Series Accessories - 400SOP

400SOP Stand-off Plug

Euromold 400SOP Stand-off Plug is designed to support and ‘dead-end’ connectors with a type B interface when removed from equipment.

Order 400SOP for 12 kV, K400SOP for 24 kV or M400SOP for 36 kV applications.


Nexans Euromold 400 Series Accessories - 400GP

400GP Earthing Plug

Euromold 400GP Earthing Plug is designed to support and earth connectors with a type B interface when removed from equipment.

Order 400GP for 12 kV, 24 or 36 kV applications.


Nexans Euromold 400 Series Accessories - 400RTPA, 400BIPA, 400CP-SC

400BIPA Basic Insulating Plug

400BIPA Basic Insulating Plug acts as a tightening nut for the 400TE tee connector kit. The plug contains a voltage detection point. The conductive rubber protection cap is included.

Order 400BIPA for 12 kV, K400BIPA for 24 kV or M400BIPA for 36 kV applications.


400RTPA, 400BIPA, 400CP-SC

400CP-SC Connecting Plug

400CP-SC Connecting Plug for connecting a 400TE and one or more 430TB, 400TB or 440TB connectors, thus creating a multiple cable connection to equipment.

Order 400CP-SC for 12 kV, K400CP-SC for 24 kV or M400CP-SC for 36 kV applications.


Nexans Euromold 400 Series Accessories - 400RTPA, 400BIPA, 400CP-SC

400RTPA Reducing Tap Plug

400RTPA Reducing Tap Plug provides a type A interface to a 400TE connector. A ‘C’ spanner, 600SW, is used to tighten the reducing tap plug on to its mating part.

Order 400RTPA for 12 kV or K400RTPA for 24 kV applications. Order 600SW for the ‘C’ spanner.


400 MT Earthing Kit for Cu Tape Screened Cables

400 MT Earthing Kit for Cu Tape Screened Cables contains a tinned copper braid (25 mm² – L=500 mm), a tinned copper wire for cleating and water sealing mastic.

Order Kit MT for 12 kV, 24 kV or 36 kV applications.



For additional General and Technical Information, download PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Find out more about our products or becoming a supplier