Nexans Euromold Interface C Symmetrical Accessories
Product overview
Nexans Euromold C Symmetrical Accessories
Nexans Euromold Interface C Symmetrical Accessories for use with connectors and bushings with an interface C as described by CENELEC EN 50180 and 50181.
Part Numbers: 400DR-B/G, 400SOP-B, 400GP-B, 400BIPA, 400CP, 440CP, 400RTPA, KIT MT, 400BE/G.
Voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
- 18/30 (36 kV)
- 19/33 (36kV)
- 20.8/36 (42 kV)
Technical Characteristics
- All Euromold Interface C Symmetrical Accessories, except the earthing plugs, are tested for AC withstand and partial discharge prior to leaving the factory.
Nexans Euromold Interface C Symmetrical Accessories
 |
400DR-B/G Dead-end Receptacle400DR-B/G Dead-end Receptacle fits over a bushing with a type C interface to provide ‘dead-end’ facility. Supplied with an earth lead. Order 400DR-B/G for 12 kV, K400DR-B/G for 24 kV or M400DR-B/G for 36 kV applications. |
|
|
|
 |
400SOP-B Stand-off Plug400SOP-B Stand-off Plug is designed to support and ‘dead-end’ connectors with a type C interface when removed from equipment. Order 400SOP-B for 12 kV, K400SOP-B for 24 kV, M400SOP-B for 36 kV or P400SOP-B for 42 kV applications. |
|
|
|
 |
400GP-B Earthing Plug400GP Earthing Plug is designed to support and earth connectors with a type C interface when removed from equipment. Order 400GP-B for 12 kV, 24 kV, 36 kV or 42 kV applications. |
|
|
|
 |
400BIPA Basic Insulating Plug400BIPA Basic Insulating Plug acts as a tightening nut for the 400TB and 440TB tee connector kits. The plug contains a voltage detection point. The conductive rubber protection cap is included. Order 400BIPA for 12 kV, K400BIPA for 24 kV, M400BIPA for 36 kV or P400BIPA for 42 kV applications. |
|
|
|
 |
400CP Connecting Plug400CP Connecting Plug for connecting two or more connectors with a type C interface together, thus creating a separable cable joint or a multiple cable connection to equipment. For use up to 630 A. Order 400CP for 12 kV, K400CP for 24 kV or M400CP for 36 kV applications. |
|
|
|
 |
440CP Connecting Plug440CP Connecting Plug for connecting two or more connectors with a type C interface together, thus creating a separable cable joint or a multiple cable connection to equipment. For use up to 1250 A. Order 440CP for 12 kV, K440CP for 24 kV or M440CP for 36 kV applications. Order K440CP+676SA or M440CP+676SA stud for connection to an already installed connector. |
|
|
|
 |
400RTPA Reducing Tap Plug400RTPA Reducing Tap Plug provides a type A interface to connectors with a type C interface. A ‘C’ spanner, 600SW, is used to tighten the reducing tap plug on to its mating part. Order 400RTPA for 12 kV or K400RTPA for 24 kV applications. Order 600SW for the ‘C’ spanner. |
|
|
|
 |
400MT Earthing Kit for Cu Tape Screened Cables400MT Earthing Kit for Cu Tape Screened Cables contains a tinned copper braid (25 mm² – L=500 mm), a tinned copper wire for cleating and water sealing mastic. Order Kit 400MT for 12 kV, 24 kV or 36 kV applications. |
|
|
|
 |
400BE/G Bushing Extender400BE/G Bushing Extender provides an extension piece to allow cables to stand away from equipment. Is used in conjuction with the 400CP, 440CP or 440PB. The bushing extender is supplied with an earth lead. Order 400BE/G for 12 kV, K400BE/G for 24 kV, M400BE/G for 36 kV or P400BE/G for 42 kV applications. |
|
|
|
For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929