Snake Tray 454 Series - Cable Tray & Accessories (CM 454-2-8, CM 454-4-8, CM 454-6-8)

Product overview

Snake Tray 454 Series – Cable Tray is the next generation in our hand bendable cable trays that can be mounted overhead or on a wall in one easy-to-install system. Accessories available.
Popular Part Numbers: CM 454-2-8, CM 454-4-8, CM 454-6-8

hand bendable cable traySnake Tray is the world’s only hand-bendable cable tray that requires no labour-intensive cutting and clipping in order to construct fast cable tray bends. Installs overhead, on walls and under access floors.

Its hand bendable design combined with Snake Tray’s built-in mounting hardware gives Snake Tray the installation cost saving advantage over any other cable tray system in today’s market. Installers are able to create turns in 10 seconds versus 20 minutes with wire mesh cable tray!

Features & Benefits

  • Patented hand bendable design (No fabrication required)
  • Built-in mounting/hanging hardware can be suspended overhead or mounted to the wall
  • Single connection creates both mechanical and electrical bond
  • Hangs or mounts from a single Point
  • Trays nest together for compact and cost effective shipping and material handling
  • Open architecture for easy loading of cable

Snake Tray 454 Series – Cable Tray

For Technical Data, download Datasheet or advise table at the bottom of the page.

CM 454-2-8

Datasheet

Snaketray CM 454-4-8

CM 454-4-8

Datasheet 

Snaketray CM 454-6-8CM 454-6-8

Datasheet 

For Technical Data, download Datasheet or advise table at the bottom of the page.
For best results it is recommended that Snake Tray be anchored every 4 to 5 feet.
Cable capacity based on 50% fill as per nec article 3
92.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).


FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Drawing Part Number Physical Dimensions Loading Dimensions Physical Volume Cable Capacity Weight Finish
Snaketray CM 454-2-8 CM 454-2-8 3¾"H x 8’L x 2⅜"W 2"D 3 si 30 3 # G/SS/PC
Snaketray CM 454-4-8 CM 454-4-8 5¾"H x 8’L x 4⅜"W 4"D 12 si 120 5 # G/SS/PC
Snaketray CM 454-6-8 CM 454-6-8 7¾"H x 8’L x 6⅜"W 6"D 28 si 260 7 # G/SS/PC

For best results it is recommended that Snake Tray be anchored every 4 to 5 feet.
Cable capacity based on 50% fill as per nec article 3
92.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).

Product Video

Find out more about our products or becoming a supplier