Prysmian BICON Universal Cable Jointing Kits - JBR Series (Low Voltage) (JBR6, JBR16, JBR35, JBR95, JBR185, JBR300)
Prysmian BICON Universal Cable Jointing Kits - JBR Series (Low Voltage) (JBR6, JBR16, JBR35, JBR95, JBR185, JBR300)

Product overview

Prysmian BICON JBR Universal Branch Joints (LV)

Prysmian BICON JBR Universal Cable Joints (LV) are branch joints (600/1000V) suitable for use with SWA cables to BS5467, BS6346 and IEC502 with polymeric insulation and copper and aluminium conductors from 1.5mm² to 300mm². Tested and approved to BS EN 50393 and ENATS TS C81/3.
Prysmian Part Numbers: JBR6, JBR16, JBR35, JBR95, JBR185, JBR300

  • Tested and approved to BS EN 50393 and ENATS TS C81/3.
  • Includes a constant force spring armour bond.
  • Utilises Prysmian’s low hazard isocyanate free JEM resin.
  • Transparent shells which offer greater visibility during installation.
  • Can be used with either compression or mechanical connectors (sold separately).

Prysmian BICON Cable Joints

For many years, BICON has been in the forefront of jointing technology, from designs using bituminous filling compounds, to the development of the highly successful BICAST acrylic resin jointing system.

Most recently, we have supplemented these ranges with heat shrink and pre-moulded products (BIMOLD). We can now offer a unique package to satisfy all requirements.

All four systems are available at voltages up to or above 33 kV and, depending on application, each may offer benefits over the others.

For instance, termination of high voltage polymeric cables requiring the facility to disconnect or add in additional cables at a later stage, means that BIMOLD is the logical choice. Likewise, BICAST provides a fast, comprehensive jointing method with a versatile range covering low and high voltage and all cable types.

Download PDF file for Prysmian BICON JBR Universal Branch Joints (JBR6, JBR16, JBR35, JBR95, JBR185, JBR300) Technical Data.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

JOINT SELECTION
Nominal Conductor
Cross Section		 Two Core Three Core Four Core
1.5 mm2 JBR6 JBR6 JBR6
2.5 mm2 JBR6 JBR6 JBR6
4 mm2 JBR6 JBR6 JBR6
6 mm2 JBR6 JBR6 JBR6
10 mm2 JBR6 JBR16 JBR16
16 mm2 JBR16 JBR16 JBR16
25 mm2 JBR16 JBR16 JBR35
35 mm2 JBR35 JBR35 JBR35
50 mm2 JBR95 JBR95 JBR95
70 mm2 JBR95 JBR95 JBR95
95 mm2 JBR95 JBR95 JBR95
120 mm2 JBR185 JBR185 JBR185
150 mm2 JBR185 JBR185 JBR185
185 mm2 JBR185 JBR185 JBR185
240 mm2 JBR300 JBR300 JBR300
300 mm2 JBR300 JBR300 JBR300

 

Note : JBR joints are provided without connectors. Compression or mechanical connectors can be provided separately.

SHELL DIMENSIONS
Joint Reference A (mm) B (mm) C (mm) Min Box Entry ØD Max Box Entry ØE  
JBR6 240 125 75 12 22
JBR16 345 160 95 20 35
JBR35 435 175 100 24 40
JBR95 650 210 190 27 51
JBR185 870 250 230 40 65
JBR300 1020 300 310 55 80

Find out more about our products or becoming a supplier