Elpress Crimp Dies for V1300, V1311, PVL1300 and PVX1300 (Cu Lugs)
Product overview
Elpress Crimp Dies for V1300, V1311, PVL1300 and PVX1300 (Cu Lugs).
Note that KRF Terminals may be used on flexible (IEC60228, class 5) as well as stranded (class 2) conductors and that KRD and KRT Terminals are used on stranded conductors.
Make sure to use dies exactly matching the terminals.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
Interested in this Product?
+44 (0)1744 762 929Technical Data
Crimp Dies
For the corresponding images consult the Technical information section after the tables.
Supplied as a pair. For hexagonal crimping of Cu Terminals and Connectors.
If not indicated otherwise, always use inner die holder V1316 and outer die holder V1318.
| Cat. No. | Description |
| V1316 | Inner Die Holder |
| V1318 | Outer Die Holder |
| KRF/ KSF | ||
| mm2 | Dies | No. of crimps |
| 10 | B8 | 1 |
| 16 | B9 | 1 |
| 25 | B11 | 1 |
| 35 | B13 | 1 |
| 50 | B14.5 | 1 |
| 70 | B17 | 1 |
| 95 | B20 | 1 |
| 120 | B22 | 1 |
| 120 | 13B22* | 2 |
| 150 | B25 | 1 |
| 150 | 13B25* | 2 |
| 185 | 13B27* | 2 |
| 240 | 13B30* | 2 |
| 300 | 13B32* | 2 |
| 400 | 13B38* | 3 |
*All Dies type 13Bxx are used without die holder.
| KRD/ KSD | ||
| mm2 | Dies | No. of crimps |
| 10 | B8 | 1 |
| 16 | B8 | 1 |
| 25 | B9 | 1 |
| 35 | B11 | 1 |
| 50 | B12 | 1 |
| 70 | B14 | 1 |
| 95 | B16 | 1 |
| 120 | B19 | 1 |
| 150 | B22 | 1 |
| 185 | 13B25* | 2 |
| 240 | 13B27* | 2 |
| 300 | 13B30* | 2 |
| 400 | 13B32* | 2 |
*All Dies type 13Bxx are used without die holder.
| KRT/ KST | ||
| mm2 | Dies | No. of crimps |
| 10 | B7 | 1 |
| 16 | B8.5 | 1 |
| 25 | B10 | 1 |
| 35 | B12 | 1 |
| 50 | B14 | 1 |
| 70 | B16 | 1 |
| 95 | B18 | 1 |
| 120 | B19 | 1 |
| 150 | B22 | 1 |
| 185 | B24 | 1 |
| 240 | 13B26* | 2 |
| 300 | 13B30* | 2 |
| 400 | 13B32* | 2 |
*All Dies type 13Bxx are used without die holder.
| DIN 46235 | ||
| mm2 | Dies | No. of crimps |
| 10 | B6DIN | 1 |
| 16 | B8DIN | 1 |
| 25 | B10DIN | 1 |
| 35 | B12DIN | 1 |
| 50 | B14DIN | 1 |
| 70 | B16DIN | 1 |
| 95 | B18DIN | 1 |
| 120 | B20DIN | 1 |
| 150 | B22DIN | 1 |
| 185 | 13B25DIN* | 2 |
| 240 | 13B28DIN* | 2 |
| 300 | 13B32DIN* | 3 |
*All Dies type 13Bxx are used without die holder.
For oval crimping of Cu branch connectors (C-sleeves). If not indicated otherwise, always use inner die holder V1316 and outer die holder V1318.
| Through conductor
mm2 |
Branch
mm2 |
Dies | No. of crimps |
| 10-6 | 10-6 | BC4** | 1 |
| 16-10 | 16-10 | BC5 | 1 |
| 25-16 | 25-16 | BC6 | 1 |
| 50-16 | 50-16 | BC8-9 | 1 |
| 70-50 | 70-25 | BC11 | 1 |
| 95-70 | 95-25 | 13BC13* | 2 |
| 120-95 | 120-25 | 13BC15* | 2 |
*Are used without die holders; make two crimps, see image 6 below.
**Die nest must be marked C4A to connect 6mm2 main to 6mm2 branch.
Technical Information
- Image 1: V1318 + B type Dies + V1316.
- Image 2: Integrated Dies 13B38.
- Image 3: One, two or three crimps demonstration.
- Image 4: V1318 + B type Dies + V1316.
- Image 5: V1318 + BC type Dies + V1316.
- Image 6: One resp. two crimps.
