Furukawa Bell Block

Product overview

Furukawa Bell Block

Furukawa Bell Block is a concrete resin block that can be used as an interface between EFLEX Square and concrete or polymer chambers/ catchpits. Available in 1, 2, 3, 4, 6 and 9-way profiles. They feature built-in female connectors.

Part Numbers: KRB-50-1, KRB-50-2, KRB-50-3, KRB-50-4, KRB-50-6, KRB-50-9, KRB-75-1, KRB-75-2, KRB-75-3, KRB-75-4, KRB-75-6, KRB-75-9, KRB-100-1, KRB-100-2, KRB-100-3, KRB-100-4, KRB-100-6, KRB-100-9, KRB-130-1, KRB-130-2, KRB-130-3, KRB-130-4, KRB-130-6, KRB-150-1, KRB-130-2, KRB-130-3, KRB-130-4, KRB-130-6

Part Numbers (Long): KRBL-50-1, KRBL-50-2, KRBL-50-3, KRBL-50-4, KRBL-50-6, KRBL-50-9, KRBL-75-1, KRBL-75-2, KRBL-75-3, KRBL-75-4, KRBL-75-6, KRBL-75-9, KRBL-100-1, KRBL-100-2, KRBL-100-3, KRBL-100-4, KRBL-100-6, KRBL-100-9, KRBL-130-1, KRBL-130-2, KRBL-130-3, KRBL-130-4, KRBL-130-6, KRBL-150-1, KRBL-130-2, KRBL-130-3, KRBL-130-4, KRBL-130-6

Eflex Square - A Furukawa Electric Product


Installing into Concrete Chambers

  1. Cut an opening in the chamber according to figure 1 (Advice PDF File: Furukawa Bell Block Installation Procedure)
  2. Cover the single opening on the inside of the chamber with a plate (or similar) and hold it in place with a wooden block/ spacer (or similar), while working.
  3. Ensure the area is free from dirt/ debris and apply epoxy putty (or similar) to the base of the opening and insert Bell Block ensuring that the side that has the diameter markings is on the outside.
  4. Fill the gap above the Bell Block with epoxy putty (or similar). It may be necessary to use a space to fill the gap if too large. Ensure that the Bell Block Connectors are free from putty to ensure a secure connection to EFLEX Square. If a watertight seal is necessary, apply epoxy putty around the edge of the block on both the inside and the outside of the chamber. Masking tape can be used to prevent concrete from entering the block connectors.

Installing Multiple Bell Blocks into Concrete Chambers

When installing a block directly above another, use epoxy putty (or similar) in between. Ensure that there are no gaps to maintain water tightness, if required. Ensure that the Connectors are free from putty to ensure a secure connection to EFLEX Square. Insert the Blocks ensuring that the side has the diameter markings is on the outside.

Installing into Concrete Chambers using Spacers

When using spacers to hold the Bell Block in place while work is close to completion, ensure that you insert the spacers next to the thickest section of the block to avoid unwanted damage.

For Installation in concrete (Tunnel example), please advice PDF File with Installation Procedure below.


System & Accessories

Furukawa EFLEX Square Duct - System & Accesories

For more information on the Furukawa Bell Block, please advise PDF Files below., 277670

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Bell Block  Part Numbers Width (W) Height (H) Length (L) Total Weight 
Size 50
KRB-50-1 76.5±3 76.5±3 100±3 0.50kg
Size 50 KRB-50-2 153±3 76.5±3 100±3 1.00kg
Size 50 KRB-50-3 229.5±3 76.5±3 100±3 1.50kg
Size 50 KRB-50-4 153±5 153±5 100±3 2.10kg
Size 50 KRB-50-6 229.5±5 153±5 100±3 3.10kg
Size 50 KRB-50-9 229.5±7 229.5±7 100±3 4.60kg
Size 75
KRB-75-1 106.5±3 106.5±3 100±3 1.00kg
Size 75 KRB-75-2 213±5 106.5±3 100±3 1.90kg
Size 75 KRB-75-3 319.5±7 106.5±3 100±3 2.90kg
Size 75 KRB-75-4 213±5 213±5 100±3 3.90kg
Size 75 KRB-75-6 319.5±7 213±5 100±3 5.80kg
Size 75 KRB-75-9 319.5±7 319.5±7 100±3 8.70kg
Size 100
KRB-100-1 131.5±3 131.5±3 100±3 1.30kg
Size 100 KRB-100-2 263±5 131.5±3 100±3 2.70kg
Size 100 KRB-100-3 394.5±7 131.5±3 100±3 4.00kg
Size 100 KRB-100-4 263±5 263±5 100±3 5.30kg
Size 100 KRB-100-6 394.5±7 263±5 100±3 8.00kg
Size 100 KRB-100-9 394.5±7 394.5±7 100±3 11.90kg
Size 130
KRB-130-1 173±4 173±4 100±3 2.30kg
Size 130 KRB-130-2 346±6 173±4 100±3 4.60kg
Size 130 KRB-130-3 519±7 173±4 100±3 6.90kg
Size 130 KRB-130-4 346±6 346±6 100±3 9.30kg
Size 130 KRB-130-6 519±7 346±6 100±3 13.90kg
Size 150
KRB-150-1 194.5±4 194.5±4 100±3 2.80kg
Size 150 KRB-130-2 389±6 194.5±4 100±3 5.60kg
Size 150 KRB-130-3 583.5±7 194.5±4 100±3 8.40kg
Size 150 KRB-130-4 389±6 389±6 100±3 11.20kg
Size 150 KRB-130-6 583.5±7 389±6 100±3 16.90kg

 

Bell Block (Long)  Part Numbers Width (W) mm Height (H) mm Length (L) mm Total Weight
Size 50
KRBL-50-1 76.5±3 76.5±3 150±5 0.80 kg
Size 50 KRBL-50-2 153±3 76.5±3 150±5 1.70 kg
Size 50 KRBL-50-3 229.5±3 76.5±3 150±5 2.50 kg
Size 50 KRBL-50-4 153±5 153±5 150±5 3.40 kg
Size 50 KRBL-50-6 229.5±5 153±5 150±5 5.00 kg
Size 50 KRBL-50-9 229.5±7 229.5±7 150±5 7.60 kg
Size 75
KRBL-75-1 106.5±3 106.5±3 150±5 1.60 kg
Size 75 KRBL-75-2 213±5 106.5±3 150±5 3.10 kg
Size 75 KRBL-75-3 319.5±7 106.5±3 150±5 4.70 kg
Size 75 KRBL-75-4 213±5 213±5 150±5 6.30 kg
Size 75 KRBL-75-6 319.5±7 213±5 150±5 9.40 kg
Size 75 KRBL-75-9 319.5±7 319.5±7 150±5 14.10 kg
Size 100
KRBL-100-1 131.5±3 131.5±3 150±5 2.10 kg
Size 100 KRBL-100-2 263±5 131.5±3 150±5 4.30 kg
Size 100 KRBL-100-3 394.5±7 131.5±3 150±5 6.40 kg
Size 100 KRBL-100-4 263±5 263±5 150±5 8.50 kg
Size 100 KRBL-100-6 394.5±7 263±5 150±5 12.80 kg
Size 100 KRBL-100-9 394.5±7 394.5±7 150±5 19.20 kg
Size 130
KRBL-130-1 173±4 173±4 150±5 3.80 kg
Size 130 KRBL-130-2 346±6 173±4 150±5 7.50 kg
Size 130 KRBL-130-3 519±7 173±4 150±5 11.30 kg
Size 130 KRBL-130-4 346±6 346±6 150±5 15.10 kg
Size 130 KRBL-130-6 519±7 346±6 150±5 22.60 kg
Size 150
KRBL-150-1 194.5±4 194.5±4 150±5 4.60 kg
Size 150 KRBL-130-2 389±6 194.5±4 150±5 9.10 kg
Size 150 KRBL-130-3 583.5±7 194.5±4 150±5 13.70 kg
Size 150 KRBL-130-4 389±6 389±6 150±5 18.20 kg
Size 150 KRBL-130-6 583.5±7 389±6 150±5 27.30 kg
Bell Block Dimensions

Find out more about our products or becoming a supplier