Nexans Euromold 400SFR-P Equipment Bushing
Product overview
Nexans Euromold 400SFR-P Equipment Bushing
Nexans-Euromold 400SFR-P/ K400SFR-P Equipment Bushings are MV-HV Bushings for use in equipment insulated with SF6 gas and specified to terminate and connect Medium/High voltage cables in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
Nexans K400SFR-P – Technical Characteristics
- Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
- The plug-in type equipment bushing 400SFR-P meets the requirements of CENELEC EN 50180 and IEC 60137.
Nexans Euromold 400SFR-P Specification & Design
The equipment bushing is a moulded epoxy insulated part with a connector interface in accordance with CENELEC EN 50181. Also, the 400SFR-P bushing has a shank outside this standard, adapted for use in SF6 gas.
Finally, to order the equipment bushing for medium/high voltage gas insulated switchgear, simply specify the type.
| Euromold Equipment Bushing Type |
Voltage Um |
Current Ir |
| 400SFR-P | 12 kV | 400 Amps |
| K400SFR-P | 24 kV | 400 Amps |
Fixings for Bushings
For Ordering Instructions and Part Number Selection Table, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
Interested in this Product?
+44 (0)1744 762 929Technical Data
|
ORDERING INSTRUCTIONS To order the equipment bushing for medium/high voltage gas insulated switchgear, simply specify the type.
|
| EQUIPMENT BUSHING TYPE | VOLTAGE Um |
CURRENT Ir |
A | B | C | D | Dia. F | Dia. G | Dia. H |
| 400SFR-P | 12 kV | 250 Amps | 218 mm | 95 mm | 33 mm | M12 | 70 mm | 109 mm | 25 mm |
| K400SFR-P | 24 kV | 250 Amps | 218 mm | 95 mm | 33 mm | M12 | 70 mm | 109 mm | 25 mm |