Prysmian BICON EFRZHMPJ Enhanced Fire Resistance & Zero Halogen Cable Jointing Kits

Product overview

Prysmian BICON EFRZHMPJ

Prysmian BICON EFRZHMPJ Enhanced Fire Resistance & Zero Halogen Cable Joints and Kits are straight joints for Enhanced Low Voltage Fire Performance (FP) cables with copper conductors: Multi Core 4mm2 to 400mm2.
Part Numbers: EFRZHMPJ3, EFRZHMPJ4, EFRZHMPJ5, EFRZHMPJ6, EFRZHMPJ7, EFRZHMPJ8.

Features & Benefits

  • Prysmian BICON EFRZHMPJ Enhanced Fire Resistance & Zero Halogen Cable Jointing KitsRated voltage 1000V
  • Tested and approved to :
    => BS EN 50393:2015 – Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
    => BS EN 61034-2, IEC 61034-2 – Smoke Emission
    => BS EN 60754-1 , IEC 60754-1 – Acid Gas Emission
    => BS 6387:2013 – Test method for resistance to fire of cables required to maintain circuit integrity under fire conditions (categories C,W & Z)
    => BS 8491:2008 – Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems (120Mins)
  • Use with BS 7846 (F2,F30,F60, F120) Fire Resistant FP Cables
  • System Requirements : BS 8519 Cat 3 & BS 5266-1 (120min)
  • Low Hazard Isocyanate Free JEM resin
  • Twin pack mixing in clear laminate sachets
  • Extremely low viscosity resin with enhanced adhesion
  • Rigid glass reinforced phenolic joint shells which are both fire retardant and LSOH.
  • Slim-line design for use with compression connectors.

Technical Information

  • LV Straight Joints for 600/1000 Volt fire Performance polymeric insulated SWA cables with copper conductors.
  • Tested and approved to BS EN 50393 : 2015
  • Fire tests on completed joints to:
    • BS 6387 categories C,W & Z
    • BS 8491:2008 – 120Mins Combined Fire, Impact & Water Jet
  • Reaction to Fire tests to:
    • BS EN 61034-2 , IEC 61034-2 – Smoke Emission
    • BS EN 60754-1 , IEC 60754-1 – Acid Gas Emission
  • JEM Resin
    => Easier mixing in “Twin Pack” totally enclosed mixing in a clear laminate sachet.
    => Extremely low mix viscosity allows void Free joint filling
    => JEM Resin is insensitive to moisture and will cure under water.
    => High flash point, non-flammable liquid – No special storage or transport requirements.
    => Does not cause skin sensitization.

Download PDF file for more information on Prysmian BICON EFRZHMPJ Enhanced Fire Resistance & Zero Halogen FP Cable Joints.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

SHELL DIMENSIONS

PART NUMBER A (mm) B (mm) C (mm)
EFRZHMPJ3 405 100 80
EFRZHMPJ4 430 110 90
EFRZHMPJ5 560 160 130
EFRZHMPJ6 740 180 145
EFRZHMPJ7 870 190 145
EFRZHMPJ8 1015 205 180
Prysmian BICON EFRZHMPJ Technical

JOINT SELECTION

Conductor Two Core Three Core Four Core Five Core Connector Required
4 mm2 EFRZHMPJ-3 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 BT6CS
6 mm2 EFRZHMPJ-3 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 BT6CS
10 mm2 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 BT10CS
16 mm2 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 BT16CS
25 mm2 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-5 BT25CS
35 mm2 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-5 EFRZHMPJ-5 BT35CS
50 mm2 EFRZHMPJ-4 EFRZHMPJ-4 EFRZHMPJ-5 BT50CS
70 mm2 EFRZHMPJ-5 EFRZHMPJ-5 EFRZHMPJ-5 BT70CS
95 mm2 EFRZHMPJ-5 EFRZHMPJ-5 EFRZHMPJ-5 BT95CS
120 mm2 EFRZHMPJ-5 EFRZHMPJ-5 EFRZHMPJ-5 BT120CS
150 mm2 EFRZHMPJ-5 EFRZHMPJ-5 EFRZHMPJ-6 BT150CS
185 mm2 EFRZHMPJ-5 EFRZHMPJ-6 EFRZHMPJ-6 BT185CS
240 mm2 EFRZHMPJ-5 EFRZHMPJ-6 EFRZHMPJ-7 BT240CS
300 mm2 EFRZHMPJ-6 EFRZHMPJ-6 EFRZHMPJ-7 BT300CS
400 mm2 EFRZHMPJ-6 EFRZHMPJ-7 EFRZHMPJ-8 BT4000CS

Find out more about our products or becoming a supplier