+44 (0)1744 762 929
Elpress AKK AlCu Bimetallic Lugs (300-400mm²) - (AKK300B-12, AKK300B-16, AKK400B-12, AKK400B-16)

Product overview

Elpress AKK AlCu Bimetallic Lugs (300-400mm²) are used primarily to connect Al conductors to Cu appliance studs, Cu bars, etc. Part Numbers: AKK300B-12, AKK300B-16, AKK400B-12, AKK400B-16.

AKK400B-12: corresponding Siemens Wind Power (SWP) part number is A9B10028745.

 

General Information

AL TERMINALS
Elpress Al Terminals and Connectors are made from pure aluminium 99.7%. We manufacture Al Terminals AK, Al Through Connectors AS with partition, Al Through Connectors AS with partition and for different areas and Al Through Connectors AS without partition. The standard size is 16 to 1200mm² but a variety of customer specified types also exist.

AL OR ALCU TYPES
Elpress AlCu Terminals and Connectors for Al cable are made from solid materials with friction welding. This method joins aluminium and copper material, when the aluminium part is rotated against the copper part under pressure and is the method providing the best connection between Al and Cu. We manufacture AlCu Bimetallic Terminals AKKAlCu Pin Bimetallic Terminals AKPTransition Connectors AKS for Al Conductors to Cu solid ConductorsAlCu Bimetal Through Connectors AKS and AlCu Bimetallic Through Connectors AKS.

MARKING
Elpress marking system for marking of Al and AlCu Terminals and Connectors shows the stranded and solid metric conductor size and reference to the id-numbers of the appropriate Elpress pre-rounding and crimp tools. Do not use other crimp tools! The T2-mark is a reference to an earlier Finnish standard. On bimetallic connectors there is also a tool id-reference to the hexagonal die to be used for the Cu-crimp.

In cases where other hole patterns, palm sizes, assembly angles, etc. are needed, a broad variety of customer specified items may be produced. Some examples are indicated here: AKK500A/2-16-12×4-35 resp. AK185-14×2-40.

For more information on Elpress AKK AlCu Bimetallic Lugs (AKK300B-12, AKK300B-16, AKK400B-12, AKK400B-16), consult PDF File or Technical Data Table  below.

*Technical Data subject to change without notice.

 

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Used primarily to connect Al conductors to Cu appliance studs, Cu bus bars, etc.
  • Two adjacent crimps are necessary - For crimp sequence see picture below table.
  • When crimping Al part, use special matrix 13P37M and special punch 13P37D, no matrix holder necessary.
Cat. No., mm2, Al-Cu mm W D d N N1 L Rec. Tool
AKK300B-12 37 37 22,3 18,5 18,5  139 V1300
AKK300B-16 37 37 22,3 18,5 18,5 139 V1300
AKK400B-16 37 37 25 18,5 18,5 139 V1300
AKK400B-12 37 37 25 18,5 18,5 139 V1300

 

Make an enquiry

Technical Information

  • Crimp sequence.
Elpress-Aluminium-Al-Terminals-Crimp-Sequence