+44 (0)1744 762 929
Prysmian BICON CFRZHMPJ Chemical & Fire Resistance & Immersion &  Zero Halogen Cable Jointing Kits

Product overview

Prysmian BICON CFRZHMPJ

Prysmian BICON CFRZHMPJ Chemical & Fire Resistance Cable Jointing Kits are Immersion &  Zero Halogen Straight Joints for NEK 606 BFOU Fire Resistant Power & Control Cables: Single & Multi Core 1.5mm² to 300mm².

Features & Benefits

  • Prysmian BICON CFRZHMPJ Chemical & Fire Resistance & Immersion &  Zero Halogen Cable Jointing Kits.Rated voltage 1000V
  • Tested and approved to:
    => BS EN 50393:2015 – Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
  • IEC 60331-1 (90mins Fire & Vibration + 15 Mins Immersion)
  • BS 6387:2013 – Test method for resistance to fire of cables required to maintain circuit integrity under fire conditions (categories C, W & Z).
  • IEC 61034-2:2005+A1:2013 – Measurement of smoke density of cables burning under defined conditions.
  • BS 6899—oil resistance
  • Low Hazard Isocyanate free JEM resin.
  • Twin pack mixing in clear laminate sachets.
  • Extremely low viscosity resin with enhanced adhesion.
  • Rigid glass reinforced phenolic joint shells which are Chemical resisting, Fire retardant and LSOH.
  • Slim-line design for use with compression connectors.
  • Requires compression connectors which are supplied separately.

Technical Information

  • Low Voltage Straight Joints for 600/1000 Volt NEK 606 BFOU fire Performance cables.
  • Tested and approved to BS EN 50393 : 2015
  • Fire tests on complete joints to:
    => IEC 60331-1 (90mins + 15 mins immersion)
    => BS 6387 categories C, W & Z

General Technical Data

In this range a Phenolic resin shell is used to provide excellent resistance to Hydrocarbons found in Oil, Gas and Petrochemical installations. Tests to demonstrate the chemical resistance of both the shell and the sealing putty have been carried out to BS6899 using ASTM oils, numbers 2 and 3. This calls for 24 hour immersion at 100°C and specifies permissible changes in mechanical properties before and after ageing. In each case minimal changes were observed after immersion in both oils, under conditions where most conventional polymers used in cable construction would not survive.

Download PDF file for more information on Prysmian BICON CFRZHMPJ Chemical & Fire Resistance & Immersion &  Zero Halogen Cable Jointing Kits.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

PART NUMBER SHELL DIMENSIONS  
A (mm) B (mm) C (mm)  
CFRZHMPJ3 405 100 80 Prysmian BICON EFRZHMPJ Technical
CFRZHMPJ4 430 110 90
CFRZHMPJ5 560 160 130
CFRZHMPJ6 740 180 145
CFRZHMPJ7 870 190 145
JOINT SELECTION
Conductor Single Core Two Core Three Core Four Core Connector Required
1.5 mm2 CFRZHMPJ-3 CFRZHMPJ-3 CFRZHMPJ-3 CFRZHMPJ-3 BT2CS
2.5 mm2 CFRZHMPJ-3 CFRZHMPJ-3 CFRZHMPJ-3 CFRZHMPJ-3 BT2CS
4 mm2 CFRZHMPJ-3 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-4 BT6CS
6 mm2 CFRZHMPJ-3 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-4 BT6CS
10 mm2 CFRZHMPJ-3 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-4 BT10CS
16 mm2 CFRZHMPJ-3 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-4 BT16CS
25 mm2 CFRZHMPJ-3 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-4 BT25CS
35 mm2 CFRZHMPJ-3 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-5 BT35CS
50 mm2 CFRZHMPJ-4 CFRZHMPJ-4 CFRZHMPJ-5 CFRZHMPJ-5 BT50CS
70 mm2 CFRZHMPJ-4 CFRZHMPJ-5 CFRZHMPJ-5 CFRZHMPJ-5 BT70CS
95 mm2 CFRZHMPJ-4 CFRZHMPJ-5 CFRZHMPJ-5 CFRZHMPJ-5 BT95CS
120 mm2 CFRZHMPJ-4 CFRZHMPJ-5 CFRZHMPJ-6 CFRZHMPJ-6 BT120CS
150 mm2 CFRZHMPJ-5 CFRZHMPJ-5 CFRZHMPJ-6 CFRZHMPJ-6 BT150CS
185 mm2 CFRZHMPJ-5 CFRZHMPJ-6 CFRZHMPJ-6 CFRZHMPJ-6 BT185CS
240 mm2 CFRZHMPJ-5 CFRZHMPJ-6 CFRZHMPJ-7 CFRZHMPJ-7 BT240CS
300 mm2 CFRZHMPJ-5 CFRZHMPJ-6 CFRZHMPJ-7 CFRZHMPJ-7 BT300CS

Make an enquiry