Hand Crimping Tools
Hand Crimping Tools
Hand Crimping Tools and mechanical hand crimping tools with ergonomic adjustment and built-in ratchet system. For Crimping Area and Crimping Geometry advise table below:
| Cat. No. | Area mm² | Crimping Geometry |
| ES2258 | 4-16 | hexagonal |
| EL2258 | 16-25 | hexagonal |
| T2258 | 4-16 | punch, hexagonal |
| ES2288 | 10-25 | hexagonal |
| EW1025 | 10-16 | punch |
| T3165A1 | 10-70 | punch |
| T2600 | 10-95 | punch, hexagonal, oval |
| DSA0115 | 0,14-1,5 | oval |
| DSA0725 | 0,5-2,5 | oval |
| GSEA0340C | 0,5-2,5 / 0,25-4 | oval, trapezoid |
| GSW0560C | 0,5-6 | oval |
| GSA0760 | 0,5-6 | oval |
| GSA0760C | 0,5-6 | oval |
| MOBILE | 0,25-10 | |
| MOBILE INSTALLATION | ||
| MOBILE DATACOM | ||
| MOBILE SOLAR | ||
| MOBILE BOX | ||
| PVL130P | 0,25-50 | |
| PVL130S | 0,25-50 | |
| DEB0325 | 0,25-2,5 | trapezoid |
| T2104 | 0,25-2,5 | trapezoid |
| DEB0560 | 0,5-6 | trapezoid |
| EEB0160 | 0,14-6 | trapezoid |
| GEB4010C-TWIN | 04-10 | trapezoid |
| GEB4010 | 04-10 | trapezoid |
| GEB4010C | 04-10 | trapezoid |
| PZD3 | 0,5-6 | rectangle |
| GEB0616C | 6-16 | trapezoid |
| GEB1025 | 10-25 | trapezoid |
| GEB1025C | 10-25 | trapezoid |
| GEB3550 | 35-50 | trapezoid |
| GEB3550C | 35-50 | trapezoid |
| TRB0515B | 0,5-1,5 | roll |
| DRB0115 | 0,15-1,5 | roll |
| DKB0325 | 0,25-2,5 | Indent |
| DKB0760 | 0,75-6 | Indent |
| GRB0560L | 0,5-6 | roll |
| GRB0560LC | 0,5-6 | roll |
| GRB0560 | 0,5-6 | roll |
| GRB0560C | 0,5-6 | roll |
| GWB4099 | 04-10 | w |
| GWB4099C | 04-10 | w |
| ESAQ0760 | 0,5-2,5 | |
| PEB0110T | 0,14-10 | trapezoid |
| PEB0110T18 | 0,14-10 | trapezoid |
| PEB0116RS | 0,14-16 | square |
| PEB0116S | 0,14-16 | square |
| PEB0160S | 0,14-6 | square |
| PEB0116H | 0,14-16 | hexagonal |
| PEB0160H | 0,14-6 | hexagonal |
| T2600C | 0,5-6 |
Elpress DRB0115 Crimping Tool (0.15-1.5mm²)
- Elpress DRB0115 Crimping Tool (Range 0.15-1.5mm²) is a tool for roll crimping of Un-Insulated Receptacles, Tab Terminals, Bullets & Sockets.
Elpress T2104 Crimping Tool (0.25-2.5mm²)
- Elpress T2104 Crimping Tool is a tool for crimping of Pre-Insulated and Un-Insulated End Terminals ranging between 0.25 and 2.5mm².
Elpress DKB0325 Crimping Tool (0.25-2.5mm²)
- Elpress DKB0325 Crimping Tool (Range 0.25-2.5mm²) is a tested and certified mechanical hand tool for indent crimping of Cu Terminals.
Elpress GSEA0340C Miniforce Crimping Tool (0.25-4mm²)
- Elpress GSEA0340C Miniforce Crimping Tool (0.25-4mm²) for preinsulated terminals 0.5-2.5mm² and pre & uninsulated end sleeves 0.25-4mm².
Elpress TEB0516 Crimping Tool (0.25-16mm²)
- Elpress TEB0516 Crimping Tool (0.25-16mm²) is a tool for crimping of Pre-Insulated and Un-Insulated End Terminals 0.25-16mm².
Elpress TRB0515B Crimping Tool (0.5-1.5mm²)
- Elpress TRB0515B Crimping Tool (0.5-1.5mm²) is a tool for roll crimping of Flag Terminal B1507FLSB8. Adjustable if changes occur.
Elpress DSA0725 Crimping Tool (0.5-2.5mm²)
- Elpress DSA0725 Crimping Tool (Range 0.5-2.5mm²) is a tool for symmetrical oval crimping of preinsulated terminals between 0.5 and 2.5mm².
Elpress DEB0560 Crimping Tool (0.5-6mm²)
- Elpress DEB0560 Crimping Tool (Range 0.5-6mm²) is a tool for crimping of Pre-Insulated & Un-Insulated End Terminals between 0.5 and 6mm².
Elpress GRB0560 Miniforce Crimping Tool (0.5-6mm²)
- Elpress GRB0560 Miniforce Crimping Tool (Range 0.5-6mm²) is a tool for roll crimping of Un-Insulated Terminals ranging between 0.5 and 6mm².
Elpress GRB0560C Miniforce Crimping Tool (0.5-6mm²)
- Elpress GRB0560C Miniforce Crimping Tool (Range 0.5-6mm²) is a tool for roll crimping of Un-Insulated Terminals ranging between 0.5 and 6mm².
Elpress GRB0560L Miniforce Crimping Tool (0.5-6mm²)
- Elpress GRB0560L Miniforce Crimping Tool (Range 0.5-6mm²) is a tool for roll crimping of Un-Insulated Terminals ranging between 0.5 and 6mm².
Elpress GRB0560LC Miniforce Crimping Tool (0.5-6mm²)
- Elpress GRB0560LC Miniforce Crimping Tool (Range 0.5-6mm²) is a tool for roll crimping of Uninsulated Terminals ranging between 0.5 and 6mm².
Elpress GSW0560C Miniforce Crimping Tool (0.5-6mm²)
- Elpress GSW0560C Miniforce Crimping Tool (0.5-6mm²) for through connectors with heat shrink insulation type SKW ranging between 0.5 and 6mm².
Elpress PZD3 Miniforce Self-Setting Crimping Tool (0.5-6mm²)
- Elpress PZD3 Miniforce Self-Setting Crimping Tool for Pre-Insulated and Un-Insulated End Terminals and Pre-Insulated TWIN End Terminals.
Elpress DKB0760 Crimping Tool (0.75-6mm²)
- Elpress DKB0760 Crimping Tool (Range 0.75-6mm²) is a tool for indent crimping of Cu Tubes and sheet Terminals. Tested with Elpress Terminals.
Showing 16‐30 of 63 products